Three-In-One Induction System
FOR
THE CHRISTEN EAGLE
SUPERCHARGE YOUR EAGLE FOR EXTRA
PERFOMANCE IN AN “EAZY TO INSTALL RAM AIR SYSTEM”
1.
ALTERNATE AIR
1. Warm inner cowl air for icing and adverse air
conditions
2.
FILTERED AIR
1.
K&N efficiency and ease of maintenance (cleaning kit)
3.
RAM AIR
1. Extra Manifold Pressure created by the
forward motion of the aircraft. The faster the aircraft goes the more manifold
pressure gain.
2. Ram Air provides direct air to the fuel servo
creating a SUPERCHARGER EFFECT. No pressure loss due to turns or filters.
3. Adds more than 1 inch of manifold pressure at
cruise settings resulting in better FUEL ECONOMY at higher altitudes.
All these advantages are in
a bolt on package that should install in less time than it takes to remove and
replace the cowlings. The remote cable is purchased separately from Aircraft
Spruce.
EAZE OF
INSTALLATION:
Installation requires that
the original inner fiberglass filter box be removed and a small clearance hole
cut in the original cowl for the new filter canister. The original filter cover
is discarded. Use the original nut plates to install the new cover plate. Back
drilling the nut plates will locate the new holes in the new scoop.
Reinstall the cowl without
the new scoop. Cut and fit the 1/4in. wet suit material that provides the
filler between the supplied 3” aluminum tube and the polished aluminum
inlet in the new scoop. A ¼ in. gap between the aluminum tube and the polished
ring is recommended. The wet suit and Goop Glue is provided to help this
procedure.
Install the outer scoop and
make sure the wet suit material is flush.
The ram air is used in clean
air and filtered air is used for taxi and take-off.
Complete
bolt on package price is $1200 plus S&H
ROD
BOWER AVIATION
Cell
559-972-6291
E-Mail
N180RB@Gmail.com
